Đồng Hồ Chênh Áp DWYER Series 2000 - Differential Pressure Gages

  • Giám sát bộ lọc
  • Vận tốc không khí với ống Dwyer Pitot
  • Giám sát chân không quạt
  • Chỉ báo áp suất trong phòng
  • Áp lực sản phẩm, phòng hoặc tòa nhà

Đồng Hồ Chênh Áp DWYER Series 2000 - Differential Pressure Gages

Lựa chọn đồng hồ chênh áp DWYER Series 2000 Magnehelic Gage cho một thiết bị đo áp suất chênh lệch thấp đa năng với nhiều lựa chọn gồm 81 kiểu và 27 tùy chọn để bạn lựa chọn. Sử dụng bộ chuyển động Magnehelic đơn giản, không ma sát của Dwyer, nó nhanh chóng cho biết áp suất không khí hoặc khí không ăn mòn - dương, âm (chân không) hoặc chênh lệch. Thiết kế chống sốc, rung, áp suất quá mức và chống chịu thời tiết theo tiêu chuẩn IP67. Chọn tùy chọn -HA High Accuracy Magnehelic® Gage để có độ chính xác trong phạm vi 1% của tỷ lệ đầy đủ, nằm bên dưới trong Trình cấu hình sản phẩm. Cũng đi kèm với tùy chọn –HA miễn phí là lớp phủ tỷ lệ được nhân đôi và chứng chỉ hiệu chuẩn 6 điểm.

  • Service: Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
  • Wetted Materials: Consult factory.
  • Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
  • Accuracy: ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
  • Pressure Limits: -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
  • Enclosure Rating: IP67.
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
  • Temperature Limits: 20 to 140°F (-6.67 to 60°C). -20°F (-28°C) with low temperature option.Size:4" (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
  • Standard Accessories: Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
  • Agency Approval: Meets the technical requirements of EU Directive 2011/65/EU (RoHS II). Note: -SP models not RoHS approved.

Đồng Hồ Chênh Áp DWYER Series 2000